Possess Sea Industrial Co., Ltd. - Products Division
Professional Neoprene Wetsuit Manufacturers, Suppliers and Exporters in China
  • Scuba Diving
  • Wetsuits Production Line
  • Wetsuits Production Equipment
Contact: Ms.Maggie, Mobile / WhatsApp: +86 138 168 15888, E-mail: maggie@wetsuit.asia

Neoprene Freediving Wetsuit - Manufacturers and Suppliers

Our freediving wetsuit made of "Medium Density" neoprene fabric, made up of two pieces, "Jacket" + "High Waist Pants", usually integrated hood, no zipper, smooth and hydrophobic surface, super tight and hydrodynamic design, better anti-compression, warm-keeping and flexible than scuba wetsuit, suitable for deep diving. For a long time, we have been providing high quality OEM and ODM services to many famous brands. Now we also accept small orders and provide custom services. And custom is the best choice for freediving wetsuit if you can.

The best choice material for the freediving wetsuit is Japan-YAMAMOTO #45 or #50 / Taiwan-Nam Liong F04 neoprene sponge, it has excellent anti-compression, elasticity and elongation. Outside coated skin / smooth skin, lining open cell / laminated fabric, and there is also a special skin & skin neoprene sponge available, outside and lining are all smooth skin, or outside coated skin, and lining smooth skin. Outside coated skin / smooth skin can reduce resistance in water. The open cell lining more suitable for your skin, good warm-keeping, but easy to damage and difficult to put on, the fabric lining, warm-keeping is slightly lower than of open cell lining, but durable and easy to put on.

Freediving wetsuit protect divers from the cold, but it also increased buoyancy, need to use BCD (Buoyancy Compensator Device), when deep diving, Because of the increase in pressure, neoprene sponge will become thinner, warm-keeping will become worse, but buoyancy will also decrease. The thickness of the freediving wetsuit must be greater than 5 mm when using the open cell lining due to manufacturing process requirements. Now many divers will choose a thinner freediving wetsuit (fabric lining), which diving will be easy and more flexible, but for deep dive divers, warm-keeping is the most important, it is recommended to use a thickness of 7 mm or more, open cell lining products.

  • Neoprene Mens 2-Piece Classic Freediving Suit-1901-BK
    Mens-Freediving-Suit-1901-BK
  • Neoprene Womens 2-Piece Classic Freediving Suit-1902-BK
    Womens-Freediving-Suit-1902-BK

Neoprene Classic Freediving Suit - 1901 / 1902

Material: CR neoprene (Japan-YAMAMOTO / Taiwan-Nam Liong), outside smooth skin, lining open cell / laminated super stretch fabric, or skin & skin (outside and lining are all smooth skin).

Thickness: 7mm (Provide other thickness).

Process: "GBS", non-penetration stitching method after bonded with glue. The thread residue can be reinforced with "Spot Tape", the seam line can be reinforced with "Tape" / "Liquid" / "Neotape".

Cnnection: Rugged double-lined beaver tail with quick-connect grommets.

Knees: Strengthen printing, lightweight & flexible, protect knees.

YAMAMOTO #45 Custom Price
Outside Material Cell Lining Fabric Lining
Smooth Skin USD $535 USD $568

Note: Large order please contact us for more information, see the table below for small order price.

  • Neoprene Mens 2-Piece Hooded Freediving Wetsuit-1903-GY
    Mens-Freediving-Wetsuit-1903-GY
  • Neoprene Mens 2-Piece Hooded Freediving Wetsuit-1903-BK
    Mens-Freediving-Wetsuit-1903-BK
  • Neoprene Womens 2-Piece Hooded Freediving Wetsuit-1904-BU
    Womens-Freediving-Wetsuit-1904-BU
  • Neoprene Ladies 2-Piece Hooded Freediving Wetsuit-1904-PL
    Ladies-Freediving-Wetsuit-1904-PL

Neoprene Hooded Freediving Wetsuit - 1903 / 1904

Material: CR neoprene (Japan-YAMAMOTO / Taiwan-Nam Liong), outside coated skin / smooth skin, lining open cell / laminated super stretch fabric, or skin & skin (outside and lining are all smooth skin).

Thickness: 7mm (Provide other thickness).

Process: "GBS", non-penetration stitching method after bonded with glue. The thread residue can be reinforced with "Spot Tape", the seam line can be reinforced with "Tape" / "Liquid" / "Neotape".

Cnnection: Rugged double-lined beaver tail with quick-connect grommets.

Knees: Strengthen printing, lightweight & flexible, protect knees.

YAMAMOTO #45 Custom Price
Outside Material Cell Lining Fabric Lining
Smooth Skin USD $548 USD $583
China Coated USD $621 USD $656

Note: Large order please contact us for more information, see the table below for small order price.

  • Wetsuit - Seam Construction - Flatlock Stitch
    Flatlock Stitch
  • Wetsuit - Seam Construction - GBS (Glue & Blind Stitch)
    GBS (Glue & Blind Stitch)
  • Wetsuit - Seam Construction - GDBS (Glue & Double Blind Stitch)
    GDBS (Glue & Double Blind Stitch)
  • Wetsuit - Seam Construction - Weld (Glue & Tape / Liquid / Neotape)
    Weld (Glue & Tape / Liquid / Neotape)

Seam Construction

Flatlock: After the two pieces neoprene fabric are overlapped, the four stitches are crossed and the six lines are crossed through the neoprene fabric.

GBS: After the two pieces neoprene fabric are bonded with "Glue", the seam is then sewed with "Blind Stitch" process.

Weld: After the two pieces neoprene fabric are bonded with "Glue", the two sides of the seam is then reinforced with "Tape" / "Liquid" / "Neotape".

  • Wetsuit - Seam Reinforcement - Tape
    Seam Reinforcement - Tape
  • Wetsuit - Seam Reinforcement - Liquid
    Seam Reinforcement - Liquid
  • Wetsuit - Seam Reinforcement - Neotape
    Seam Reinforcement - Neotape

Seam Reinforcement

Tape Seam: Using fabric as a substrate, bonded by hot melt adhesive film, thin, the cost is relatively cheap.

Liquid Seam: Using liquid rubber as a substrate, forming a protective tape after curing, has smooth surface, and waterproof performance is the best.

Neotape Seam: Using CR neoprene as a substrate, bonded by glue, has better elasticity, firmness and waterproof performance, but the cost is relatively higher.

  • Wetsuit - Thread Residue Reinforcement - Bartack
    Thread Residue Reinforcement - Bartack
  • Wetsuit - Thread Residue Reinforcement - Glue
    Thread Residue Reinforcement - Glue
  • Wetsuit - Thread Residue Reinforcement - Spot Tape
    Thread Residue Reinforcement - Spot Tape

Thread Residue Reinforcement

Bartack: Usually used for thread residue reinforcement of "Flatlock Stitch".

Glue End: Usually used for thread residue reinforcement of "Blind Stitch" and the cost is cheap.

Tape End: Usually used for thread residue reinforcement of "Blind Stitch", comfortable and durable, but the cost is higher.

Possess Sea CCS (China Coated Skin):

Possess Sea CCS (China Coated Skin), our own coating processing. Compared with YAMAMOTO coating products, the appearance and firmness are slightly worse and the price is relatively cheap. The following picture for optional colors.

YAMAMOTO SCS (Super Composite Skin):

YAMAMOTO SCS (Super Composite Skin) is the best performance of similar products, the appearance and fastness of the best, the most expensive, suitable for high grade products. The following picture for optional colors.

The price of small order services of Possess Sea's specified design (MOQ: A set of suit):

Order Description: Select Possess Sea classic design and size table, can change the coated color, accept custom LOGO printing (extra charge, specific reference table). Small batch ordering has the highest cost performance.
Japan-YAMAMOTO #45 CR Sponge:
Item A piece More than 5 pieces More than 10 pieces More than 30 pieces More than 50 pieces
Open Cell Lining & Outside: Smooth Skin
1901 / 1902 USD $356 USD $308 USD $273 USD $249 USD $237
1903 / 1904 USD $366 USD $317 USD $281 USD $256 USD $244
Fabric Lining & Outside: Smooth Skin
1901 / 1902 USD $381 USD $330 USD $292 USD $266 USD $254
1903 / 1904 USD $392 USD $340 USD $300 USD $274 USD $261
Open Cell Lining & Outside: China Coated Skin
1903 / 1904 USD $421 USD $364 USD $322 USD $294 USD $280
Fabric Lining & Outside: China Coated Skin
1903 / 1904 USD $447 USD $387 USD $342 USD $312 USD $298

Lead Time: Usually within 30 days for Possess Sea LOGO, Usually within 45 days for custom LOGO. Without Transportation time (It influenced by different address, mode of transportation, customs clearance and so on).

Custom LOGO printing fee reference:

Type Price
First Screen Printing Plate USD $40
Second and More Screen Printing Plate USD $20 / Screen Printing Plate
Explain: Screen printing film and plate, a pattern of a color to open a film and plate, such as monochrome LOGO need a film and plate, double color LOGO need two films and plates and so on.
Note 1: Large or complex patterns need to charge extra fees and may not be realized or simplified, depending on the design.
Note 2: Just need pay the Screen printing film and plate cost, change the color need not to re pay fees, printing is free.
Note 3: Because it is a wooden frame, not long-term retention (for 3 months), the same or similar batch orders, the same LOGO (pattern and size), the cost of the screen printing film and plate is paid only once.

Reference for transportation charges for small order & custom services:

Item Remarks
Type of Shipping Sea / Air / Express (UPS / TNT / FEDEX / SF)
Cost of Shipping Cost according to the actual (Express: UPS / TNT / FEDEX have discount) or use customers accounts.
Place of Delivery Shanghai City China (Post Code: 200433) / Guangdong Province China (Post Code: 523402)
International express cost reference:
QTY 1 Piece / 3mm 2 Piece / 3mm 5 Piece / 3mm
Box Size (cm) 60*60*5 60*60*8 60*60*17
United States, Canada USD $40 USD $55 USD $95
Australia, New Zealand USD $30 USD $40 USD $70
United Kingdom, France USD $45 USD $55 USD $100
Singapore USD $20 USD $25 USD $40
Indonesia USD $40 USD $50 USD $90
Hong Kong USD $6 USD $8 USD $15
Note 1: The above table of unlisted country or region express cost please ask us (please provide the correct country or region name, city name, zip code).
Note 2: If the importing countries or regions need to collect import duties, Usually the express company will charge the consignee after the declaration and payment of the tariff, and some countries or regions need additional information from the consignees.

Neoprene Material Explain:

Normative Interpretation: "Neoprene" = "CR" ≠ "SCR" ≠ "SBR"
"Neoprene" just refers to the "CR" (Chloroprene Rubber), but now the industry "Neoprene" include "CR" (Chloroprene Rubber), "SCR" (Chloroprene & Styrene Butadiene Rubber), "SBR" (Styrene Butadiene Rubber).

Normally we call the neoprene sponge as raw material, the product after cutting and laminated (cut thickness, laminated different fabric or coated / embossed / perforated) is called semi-finished product (neoprene fabric), the final product is called finished product (the product of neoprene material such as wetsuit, etc). We produce semi-finished product and finished products, semi-finished products (neoprene fabric) have a variety of uses, can be sold alone, the material Department of our factory has been supplying semi manufactured products (neoprene fabric) to manufacturing factories in various countries all over the world.

Neoprene Type CR SCR SBR
Sponge Color Black, Cream Black, Cream Black, Cream, White

Neoprene sponge color is black, cream and white. Usually we use black, but if light color fabric is laminated, the use of cream or white neoprene sponge is better, this collocation can better reflect the color and bright of the light color fabric. If use the black neoprene sponge will light color fabric dark and distorted. But the cost of cream or white neoprene sponge is higher than the black neoprene sponge.